Wählen Sie!

Neutralisator / Wäscher / Bleicher

  • Verfügbarkeit Auf Bestellung
  • Hersteller Armfield
  • Artikelnr. FT66
  • Produkt angesehen: 15653


Neutralisator / Wäscher / Bleicher

Das Standmodell Armfield FT66 Neutralisator/Wäscher/Bleicher für die Batchverarbeitung ist in der Lage, die Vor-Raffinationsstufen für kleine Mengen von rohen Speiseölen durchzuführen und erleichtert damit die praktische Forschung und Entwicklung.


• Simple Controls
• Surfaces in contact with the process fluid are stainless steel
• Agitation by variable speed flat blade impeller (variable to 1800rpm)
• Working vacuum of 75mm Hg (ABS) with liquid ring vacuum pump
• Pressure leaf filter designed to BS5500
• 25 litre vessel designed to BS5500
• Compact and self contained
• Cooling coil
• Extraction pump
• Electrical heating element


> Ease of use
> Small quantities of oil can be processed
> No consumable filter elements required


The main reactor vessel, reagent vessels, filter pump and filter are constructed from stainless steel and are mounted within a floor standing, stainless steel framework. A variable speed agitator, electrical heating element, cooling coil and observation port are incorporated in the Bleacher reactor which is a vertical cylindrical vessel designed to process a 25 litre batch of oil. A liquid ring vacuum pump, also mounted within the framework, is used to create the desired vacuum in the vessel. Processing under reduced pressure prevents oxidation of the oil and promotes drying. Vacuum suction is also used to charge the reactor with crude oil and to add reagents and bleaching earth from the appropriate vessels.

The reagent tank is used to make up caustic solutions and other additives and to pre-heat to the desired temperature prior to addition to the reactor. Water for the washing process is also pre-heated in this vessel. The heating element in the reagent tank is controlled automatically by an electronic controller in the control console.The desired operating temperature of the reactor vessel contents is achieved using an immersed electrical heating element with a maximum power input of 3.0 kW.

The heating operation is controlled using a digital display electronic controller which automatically maintains the temperature. Cooling of the hot oil is achieved by circulating cold water through a submerged coil. A flat blade agitator in the reactor is driven by a geared electric motor and the speed of the motor can be adjusted up to a maximum of 1800rpm using a potentiometer on the console. Agitation of the oil charge promotes mixing of reagents and adsorbents with the oil as well as increasing heat transfer efficiency of the heating and the cooling cycles. The bleaching earth hopper is a steep sided conical vessel designed to allow dosing of the required amount of bleaching earth into the reactor. It is also used for the addition of other adsorbents such as activated carbon. Diatomaceous earth as an aid for the filtering process can be charged from this hopper.

Schematic diagram
of the unit

Schematic diagramof the unit enlarge

A stainless steel centrifugal pump is used to transfer the oil to the filter in order to filter out any solids. The filter is a pressure leaf type which is designed for repeated use with no consumable filter elements required. By recirculating the oil/adsorbent mixture through the filter, a layer of solids is built up on the filter mesh screen upon, which the remaining solids are deposited. When the oil is clear, it is discharged from the reactor through the filter after which the ‘filter cake’ is dried using compressed air so that it can be removed easily from the filter screen.

Modes of Operation

Crude oil, freshly extracted from seed contains undesirable impurities, which must be removed. These include free fatty acids, phosphatides, colour pigments and fine particles.

Using the FT66, the crude oil can be refined by operation in the following modes:-

Free fatty acids are removed by neutralising them with a strong base such as caustic soda, which forms a water- soluble soap. The soap is then removed by a combination of thorough washing, gravity settling and draining.

Phosphatides are also removed by washing, settling and draining after the addition of phosphoric acid to form water soluble gums. Any water remaining in the oil is dried by heating the oil under vacuum.

Colour pigments are removed or reduced by the addition of an adsorbent such as Fullers Earth. The desired colour of the oil can be obtained by adjusting the amount and type of earth used and the physical conditions under which the bleaching operation is carried out.

Removing the element of the pressure leaf filter

Removing the element of the pressure leaf filter enlarge

After bleaching, an efficient filtering process ensures that the earth and other particulates are removed leaving a clean, refined oil ready for further processing such as hardening and deodorising. The filter used for this is a pressure leaf type, which is commonly used in the edible oil industry for the removal of adsorbent.


Independent tests carried out by Manchester Metropolitan University, Hollings Faculty using crude Rapeseed oil gave the following analytical results:


Iodine value 117 117 117
Free fatty acid 1.5% 0.12% 0.1%
Colour 70 Yellow
7 Red
3.2 Blue
50 Yellow
3.3 Red
20 Yellow
0.5 Red
Soap in oil - < 100ppm nil
Peroxide value 0.4 mequiv/kg nil nil



> Effect of variation of operating parameters such as temperature, vacuum and degree of agitation
> selection of the correct amount and strength of caustic solution for the particular oil
> selection of the type and quantity of adsorbent for the bleaching operation
> optimization of operation of a pressure leaf filter

Unit Specifications

Reactor Vessel

Material: Stainless steel
Total volume: 45 litres
Working volume: 25 litres
Diameter: 0.30m
Height: 0.65m
Heating element: 3.0kW
Cooling coil area: 0.12m2
Agitator speed: 250-1800 rpm

Reagent Vessel:

Material: Stainless steel
Working volume: 3.0 litres
Diameter: 0.165m
Height: 0.20m
Heating element: 1.0kW

Earth Hopper:

Material: Stainless steel
Volume: 0.3 litres

Pressure Leaf Filter:

Material: Stainless steel
Filter volume: 3.8 litres
Filter cake capacity: 1.0 litre
Filtering area: 0.09m2
Filter screen: 110 mesh (0.3mm wire)
Maximum pressure: 3.0 bar

Vacuum Pump:

Type: liquid-ring
Sealant: water
Working vacuum: 75mm Hg (ABS)
Sealant flow rate: 8.0 l/m.


FT66-C: 415V/3ph/50Hz, (14kW)
FT66-D: 208V/3ph/60Hz, (10kW) 
FT66-E: 380V/3ph/50Hz, (13kW)
FT66-F: 220V/3ph/60Hz, (10kW)

30 l/m @ 3.0 bar min/5.0 bar max

Compressed Air
20 l/s @ 3.0 bar min/10.0 bar max

Overall volume: 2.0m³
Gross weight: 500kg

Overall Dimensions

Height: 1.90m
Width: 1.28m
Depth: 0.75m

+ Bewertung

Hinweis: HTML ist nicht verfügbar!
    Weniger Gut           Gut

Haben Sie Fragen über Neutralisator / Wäscher / Bleicher?