Modulares Miniatur-Prozesssystem UHT/HTST

Modulares Miniatur-Prozesssystem UHT/HTST

Marke: Armfield
Artikelnr.: FT174X
Verfügbarkeit: Auf Bestellung
-+

MINIATURE-SCALE R&D TECHNOLOGY
FT174X Modulares Miniatur-Prozesssystem UHT/HTST

Das modulare HTST / UHT Verarbeitungssystem FT174X von Armfield wurde entwickelt, um Produkte mit Durchflussraten von 12 bis 40 l / h oder mit bis zu 60 l / h für Wasser (oder Produkte mit ähnliche niedriger Viskosität) zu behandeln.

Standardmodule für die direkte (Dampfinjektion) oder indirekter Wärmeübertragung (Röhren- und / oder Plattenwärmetauscher), aseptische Verarbeitung, Homogenisierung vor oder nach der Hocherhitzung und zusätzliche Kühlstufen stehen zur Verfügung.

These, along with many other options, allow multiple modules to be included in the same system, giving high process adaptability by reconfiguration of flexible product hoses, using quick release connections. The sterilisation options allow it to be linked to an Armfield sterile filling bench to produce aseptic product, even when using long holding tubes and/or downstream homogenisation.

As with all Armfield systems, it comes with hygienic fittings throughout as standard, it is easy to clean and very flexible in use.

The Touch screen control panel makes it extremely user friendly to configure and monitor processing parameters. The operator is prompted at every stage whenever intervention is required.

Features

• Totally Modular System
• Direct and/or indirect heating
• Scraped surface, Tubular & Plate heat exchangers
• Full sterile capability options
• Touch screen control panel for ease of use
• Hygienic fittings as standard
• Integral homogeniser option
• Standard throughputs from 12 – 60 l/h
• Process temperatures >150°C
• Controllable Pre-heat - option
• Built-in CIP facilities
• USB data logging - option
• Electronic flow meter - option

Benefits

>High degree of user configuration
>Rapid start–up
>Switch over between heat exchangers is quick and easy
>Links directly to sterile filling bench
>Small footprint can contain tubular, plate heat exchangers, DSI module & homogeniser
>Low product hold-up

Description

FT174X Base Unit

The base unit comprises a stainless steel table for mounting the process equipment, a feed pump and vessel, the touch screen control panel and all associated electrical controls housed in an IP65 cabinet.

On top of the table are four mounting positions for the selected heat exchangers. There is also space for a variable holding tube. Under the table top are storage positions for unused heat exchangers, plus space for the optional vacuum and extraction pumps used for direct heating. There is also space for the optional integrated homogeniser.

The system is PLC controlled, with a high resolution TFT 8” colour touch screen panel. All operation functions are controlled from this panel, including configuration, mode of operation (sterilisation, process or clean in place). Different sets of processing parameters can be edited stored and quickly recalled using the menu capability of the system.

Similarly the ancillary items such as the homogeniser and sterile filler are also controlled from this panel. The system can be quickly and easily interfaced to other free-standing Armfield process items such as a mixing vessel, a chiller (FT63 or FT64) or a sterile filling system (FT83).

The base unit provides the services to the heat exchangers.
Four sets of services are provided:

Main Heat
Steam is applied to the service side of the heating section of the product heat exchanger using an electro-pneumatic steam control valve. The product temperature is measured at the end of the heat exchanger (or holding tube) and this value is used by a PID control algorithm, implemented in the PLC, to control the steam regulating valve ensuring the user defined set point is maintained. The same steam output and control valve is used to provide the steam injection for the optional Direct Steam Injection module.

Preheat
A gentle preheat action is achieved by using steam at sub-atmospheric pressure (and hence low temperature). In this way, steam temperatures at or significantly below 100°C can be produced and low differentials between steam temperature and product temperature are achieved. Stable temperatures of 60°C or less are feasible. Control of the steam pressure/temperature is achieved by a manual steam control valve Automatic PID control is an available option.

Cooling
Cooling water is applied to the cooling section of the product heat exchanger via a rotameter in order to measure flow rate.

Chilling
(Optional), using an external recirculating chiller such as the Armfield FT63, FT64 or other chilled water supply.

Feed Pump System
A progressing cavity feed pump is used as this gives consistent volumetric flow rate for a wide range of liquid viscosities.

It consists of a stainless steel rotor within a food-grade rubber stator. All metal parts of the pump which come into contact with product are made from 316L stainless steel. A mechanical seal isolates the product from the drive system.

This pump provides a very wide range of flow capability, from as low as 12 l/h to as much as 120l/h (used for CIP). The pump is fitted with a feed tank and level sensor, a pressure relief valve and temperature and pressure sensors.

Options

FT174-40 Flowmeter Option

The standard unit displays an estimated flow rate calculated from the feed pump speed. This is accurate enough for many applications, but where more accuracy is required a flowmeter is available for measuring the product flow rate.

FT174-43 Additional Cooling Stage

Adds the location points and plumbing for a fourth heat exchanger.

FT174-45 Sterilisation Option (indirect heating)

Sterilisation is achieved by applying steam onto the outside of the cooling tubes instead of cold water. This sterilises the cooling tubes and gives the power to sterilise a downstream homogeniser. The FT174-45 option provides the switching valves necessary to perform this. Note; sterile operation is limited to single stage cooling. The FT174-45 is only needed when using indirect heat exchangers for the main cooling (i.e. not using the vacuum cooling vessel). However FT174-45 components need not be removed when a vacuum module is fitted.

FT174-46 Controllable Preheat Option

This option is required when it is necessary to achieve an accurate preheat temperature (e.g. when it is important to homogenise at a particular temperature) or when using the preheat facility by itself for pasteurising at lower temperatures. It is also beneficial when using direct steam injection.

It replaces the standard manual preheat control valve with an automatically controlled electro-pneumatic valve. A PID loop is used to control the temperature to the operators desired set point by actuation of the valve. The option also includes an electronic pressure sensor to measure the steam pressure. This pressure and its equivalent temperature (determined in the PLC) are displayed on the control panel.

FT174-48 Direct Injection Option

The same steam valve used to provide the main heating on an indirect heat exchanger can be used to provide the steam control for a direct injection heat exchanger. The heat exchangers themselves therefore become interchangeable.

The option comprises:
> steam conditioning unit, built into the service unit frame (including a culinary grade steam filter to clean any impurities from the steam prior to injection)
> steam injection port.

When using direct steam injection, conventional tubular (or plate) heat exchanger’s are used in position 1 for preheat and 4 for final cooling.

FT174-49 Vacuum Evaporator Module

This module is used in conjunction with a DI heat exchanger to evaporate away the injected steam and prevent dilution of the product.

It comprises:
> A module assembly located in position 3, inc:
- Vacuum vessel with sight glass
- Back pressure valve on inlet
- Tubular HE (2 tubes) for cooling prior to the extraction pump
- Pressure (vacuum) sensor and Temperature sensor
- Mounting position for the steam injector, FT174-48

> Vacuum pump assembly mounted below the table with isolator valve and bleed valve.
> Extraction pump to pump out the contents of the vessel against the vacuum

FT174-55 Sterile Vacuum Module (used instead of FT174-49)

This module is an alternative to the vacuum module, which is modified to make sterilisation possible.

The module adds a hygienic divert valve prior to the vacuum chamber, a cooling heat exchanger, a sterile breather and a second valve and steam trap at the filler (FT83). Steam is used to sterilise the system, injected through the direct injection port.

The divert valve allows product to be diverted away from the vessel until it is fully up to temperature keeping the vessel sterile during processing.
Note: Products with certain particulates can be processed on the Direct Steam Injection option. Please consult with Armfield regarding your particular application.

FT174-DTA-ALITE Data Logging Option

This option allows the various operating parameters to be recorded on a standard Windows PC (not provided) via a USB interface. It also displays calculated values such as steam equivalent temperatures and f0 values. Graphs and tables can be displayed and updated in real time. Data can be saved to Excel file format.

FT91-174 Homogeniser Assembly

Twin piston two stage variable flow rate homogeniser with pulsation damping devices, bleed valve to control input pressure, plus temperature, product line pressure and homogenisation pressure sensors all integrated within the FT174X frame, allowing upstream or downstream processing.

Homogenisation pressure: 400bar max
Maximum flow rate: 55 l/h

Accessories

Various heat exchanger and holding tube options can be easily added to the service unit.

FT174-75 Scraped Surface Heat Exchanger Options

Now with scraped surface heat exchanger options for viscous products.
Scraped surface heat exchangers can be fitted at any position (heat, preheat, cool) for use with viscous products. Product flow rates would be typically 10-20 l/hr. Please contact Armfield with your specific requirements.

FT174-25 Tubular Heat Exchanger

A single bank of 4 tubes, with temperature sensor. The product flows through the centre whilst the service fluid (heating or cooling fluid) flows through the outer tube.
The FT174-25 is normally used for lower flow rates, (typically 10-20 l/h).

Can be used for:
- Preheat
- Main Heat (indirect)
- Cooling 
- Chilling

i.e. more than one FT174-25 can be used at the same time.
Static mixers are available to promote turbulence in the tubes and improve heat transfer. (Order code FT174-21 for mixers for two tubes).

FT174-26 Tubular Heat Exchanger

A single bank of eight tubes, with temperature sensor. The product flows through the centre whilst the service fluid (heating or cooling fluid) flows through the outer tube.
The FT174-26 can achieve higher flow rates than the FT174-25, (typically up to 60 l/h).

Can be used for :
- Preheat
- Main Heat (indirect)
- Cooling
- Chilling

i.e. more than one FT174-26 can be used at the same time, and FT174-26’s can be mixed and matched with FT174-25’s.
Static mixers are available to promote turbulence in the tubes and improve heat transfer. (Order code FT174-21 for mixers for two tubes).

FT174-36Extended Plate Heat Exchanger

Single stage plate heat exchanger comprising 18 plates.

Can be used for :
- Preheat
- Main Heat (indirect)
- Cooling
- Chilling

i.e. more than one FT174-36 can be used at the same time, and FT174-36’s can be mixed and matched with tubular heat exchangers if required.

FT174-42 Pneumatic Back Pressure Valve Accessory

The FT174-42 is a pneumatic pinch valve which provides much better performance than the standard sprung back pressure valve when used with products containing particulates.

FT174-65 Variable Holding Tube

Provides nominal holding times of 15, 30, 45, 60, 75, 90, 105, and 120s for a flow rate of 20 l/h.

Note: FT174X display shows the actual hold time based on the measured or estimated flow rate used during processing.

Other Holding Tubes

Other Holding tubes can be provided to suit your holding time and flowrate requirements.

 

Further Accessories

FT83-174 Sterile Filler

When used with one of the sterile configurations above (FT174-45 or FT174-55) the FT83 can be used to fill pre-sterilised containers in a sterile environment. The FT83-174 version is completely compatible with the FT174X and is controlled from the FT174X’s touch screen.

FT63 or FT64 Recirculating Chiller

A recirculating chiller, used in conjunction with the additional cooling stage option (FT174-43) allows product to be output at reduced temperatures. The FT63 is suitable for lower flow rates, but the FT64 is recommended for higher flows.

Mixing Tanks

Armfield can offer arrange of mixing tanks with low speed agitators, optional heated jackets and optional high shear mixing. Standard sizes are 50l and 100l.


Please contact us with your specific requirements.

Applications

> Baby foods
> Beer
> Condiments
> Confectionery
> Cream
> Culture media
> Desserts and puddings
> Fruit and vegetable purees
> Fruit juices and cordials
> Gelatine products
> Gravies
> Ice cream
> Health and nutritional products
> Meat pie fillings
> Milk
> Pet foods
> Pharmaceuticals
> Ready meals
> Sauces and soups
> Yogurts

Configuration

Some typical configuration examples

System 1.
Entry Level System, 12-40l/h
FT174X Base unit +
FT174-25 (1 off )    Tubular heat exchanger (preheat)
FT174-26 (2 off )    Tubular heat exchanger (main heat and cooling)

System 2.
Aseptic indirect system with controlled preheat and homogenisation, 20-55 l/h
FT174X Base unit +
FT91-174     Homogeniser
FT174-25 (1 off)    Tubular heat exchanger
FT174-26 (2 off)    Tubular heat exchanger
FT174-45     Sterilisation Subsystem (indirect heating)
FT174-46     Controllable Preheat
FT83-174     Filler

System 3.
Aseptic direct injection system with controlled preheat, 20-60 l/h
FT174X Base unit +
FT174-26 (2 off)    Tubular heat exchanger (preheat and cooling)
FT174-48     Direct Injection Heat Exchanger
FT174-55     Sterile Vacuum System
FT174-46     Controllable Preheat (optional)
FT83-174     Filler

System 4.
Combined Direct and Indirect R&D Research System
FT174X Base unit +
FT174-25     Tubular heat exchanger (preheat)
FT174-26     Tubular Heat Exchanger (main heat)
FT174-48     Direct Injection Heat Exchanger
FT174-26     Tubular Heat Exchanger (cooling)
FT174-49     Vacuum Evaporator
FT174-65     Variable Holding Tube
FT174-46     Controlled preheat

Other Configurations
The above configurations are just a few examples of the many configurations available with the modular FT174X system.

Contact Armfield for more details.

Requirements

Electrical Supply:

6A 230V 50/60Hz Hz single phase
(16A if FT174-49 or FT174-55 are fitted, if the FT174-91 Homogeniser option is fitted, total power requirement is 30A, 230v, single phase or 16A, 400v, three phase)

Consult Armfield for other options

Compressed Air:
7 bar

Steam:
6 bar, estimated consumption 15 Kg/hr

Note: Armfield can supply a steam boiler if required, order code UOP10.

Mains Water:
5l/min at 2 bar 
(10l/min if FT174-49 or FT174-55 are fitted)

Shipping Specification

Volume: 4.0m³
Gross weight: 567kg

Overall Dimensions

Height: 1.5m
Width: 1.95m
Depth: 0.80m

Haben Sie Fragen über Modulares Miniatur-Prozesssystem UHT/HTST?

TECHNOLAB SA - Switzerland © 2017 - Änderungen vorbehalten!